Process Length Measuring Device PCE-PLM 10

Name: Process Length Measuring Device PCE-PLM 10
SKU: 12095
Availability: BackOrder

PCE-PLM 10

Availability : กรุณาติดต่อสอบถาม

หมวดหมู่: เครื่องวัดระยะทาง

รายละเอียดเพิ่มเติม

Process Length Measuring Device for fixed installation/for contacting length measurement/�

Measured value is retained in the event of a power failure / connection to the existing process technology�

The Process Length Measuring Device is a reliable measuring device when it comes to determining the length in the industrial sector. The Process Length Measuring Device is a fully assembled system consisting of an evaluation unit and the length measuring sensor. The length sensor of the Process Length Measuring Device can be firmly attached to a holder in the process control using the existing mounting device. Further settings of the length sensor on the Process Length Measuring Device are not required.

The display of the Process Length Measuring Device can be inserted in a panel cutout provided according to DIN. In addition to displaying the measured value, the evaluation unit of the Process Length Measuring Device can also be connected to the existing industrial process control in order to switch a control signal at the set lengths. The Process Length Measuring Device is thus used, for example, in the paper industry.

– Very precise measuring mechanism for fixed installation

– Relay outputs for switching a control

– Contacting length measurement

– External display for control cabinet installation

– Direct operation of the display using the buttons

– Storage of the measured value in the event of a power failure

Measurement display	6 x 7 segment display with comma
Counting range	1 … 999999
Accuracy	± 1 count of the entire length
Input signals	quadratic pulse signal
	High: 5 … 30 V
	Low: 0 … 1 V
Counting speed	5, 30, 200, 1000, 3000
Adjustable coefficient range	0.00001 … 9.99999
Input	<5 W
Outputs	2 x relays, NPN transistor
Relay output	250 V AC / 3 A
Transistor output	12 V DC / <50 mA
Power supply	110 … 220 V AC
Insulation resistance	> 100 MΩ
Storage of the displayed value	> 10 years
Environmental conditions	0 … 50 ° C, 35 … 85% RH non-condensing
Overall dimensions	96 x 48 x 110 mm
Panel cut	92.5 x 45.5 mm

Wheel
Pulse resolution	0.001 m
Measurement accuracy	± 1 count of the entire length
Impeller diameter	63.67 mm
Mounting holes spacing	22 mm
Mounting holes diameter	63.67 mm (one turn is 10 cm)
Power supply	10 … 30 V
Dimensions	95 x 85 x 63.67 mm