Cable detector�PCE-186 CB
Cable finder with voltage tester / Non-conducting probe tip / Headphone jack / RJ-11 Plug with crocodile clamps / For line break detection / For non-live cables / Transport bag
Cable finder with voltage tester / Non-conducting probe tip / Headphone jack / RJ-11 Plug with crocodile clamps / For line break detection / For non-live cables / Transport bag
The cable finder PCE-186 CB consists of a transmitter and a receiver. The transmitter of the line finder has many functions. For example, the line finder can be used to find wires in walls or break cables. Another function of the line finder is the testing of telephone sockets. To do this, the RJ-11 connector must be plugged into the telephone socket to be tested. The transmitter of the line finder signals an incoming call based on the LEDs. This feature does not require a phone for verification.
In addition to these functions, the line finder has a multimeter function. This allows AC voltages and DC voltages up to 1000 VDC to be measured. Furthermore, resistance measurements and continuity measurements are possible. Because of this variety of functions, the line finder is an optimal helper for maintenance and repair work on cables.
– Voltage measurement AC / DC
– For detection of line interruptions
– Non-conductive probe tip
– Sensitivity adjustment
– Transport bag
– Cable tracking in walls and cable duct
– Different beeps
– Resistance measurement
– For detection of line interruptions
– Non-conductive probe tip
– Sensitivity adjustment
– Transport bag
– Cable tracking in walls and cable duct
– Different beeps
– Resistance measurement
AC voltage measurement | ||
Measuring range | Resolution | Accuracies |
400 mV | 0.1 mV | ± 1% + 5 Dgt |
4V | 1 m V | ± 1% + 5 Dgt |
40V | 10 mV | ± 1% + 5 Dgt |
400V | 100 mV | ± 1% + 5 Dgt |
750V | 1V | ± 1% + 5 Dgt |
DC | ||
Measuring range | Resolution | Accuracies |
400 mV | 0.1 mV | ± 0.5% + 3 Dgt |
4V | 1 mV | ± 0.5% + 3 Dgt |
40V | 10 mV | ± 0.5% + 3 Dgt |
400V | 100 mV | ± 0.5% + 3 Dgt |
750V | 1V | ± 0.5% + 3 Dgt |
Resistance | ||
Measuring range | Resolution | Accuracies |
400 Ω | 0.1 Ω | ± 1.2% + 3 Dgt |
4 kΩ | 1 Ω | ± 1.2% + 3 Dgt |
40 kΩ | 10 Ω | ± 1.2% + 3 Dgt |
400 kΩ | 100 Ω | ± 1.2% + 3 Dgt |
4 MΩ | 1 kΩ | ± 1.2% + 3 Dgt |
40 MΩ | 10 kΩ | ± 2.0% + 4 Dgt |
Input impedance | 10 MΩ | |
Overvoltage protection | 500V DC | |
Continuity test | ||
Measuring range | Beep | |
400 Ω | > 25 Ω | |
Line detection | By beep | |
Beep switchable | Slowly pulsating tone | |
Fast pulsating tone | ||
Locating depth | Max. 50 cm | |
Connections | RJ-11 plug, coconut clamps | |
Power supply receiver � | 9V block battery | |
Power supply transmitter | 9V block battery (transmitter function) | |
2 x 1.5V AAA (voltmeter) | ||
Environmental conditions � | 0 … 50°C / 32 … 122°F, 5 … 95% rh | |
Weight transmitter | About 265 g / < 1 lb | |
Weight receiver | About 89 g / < 1 lb |