ROSM – Modulated Remote Optical LED Sensor

หมวดหมู่: Stroboscope

รายละเอียดเพิ่มเติม
บทวิจารณ์ (0)

DESCRIPTION

How it works: Instead of being on continuously like our other optical sensors, the LED light source in the ROSM is modulated on and off at a high frequency. That high-frequency light signal is reflected back at the sensor for processing while all other sources of light are filtered out and/or ignored. The ROSM is packaged in a threaded 303 stainless steel tube and has a green LED on-target indicator.

ROSM-P: Modulated Remote Optical Sensor with 8-foot cable, 1/8″ (3.5 mm) phone plug connector, mounting bracket, and 12 inches of reflective tape.

ROSM-W: Modulated Remote Optical Sensor with 22-foot cable with tinned leads, mounting bracket, and 12 inches of reflective tape.

Longer Cable Models and Bulk Sensor Cable are available for any of our sensors. Please give us a call or email us for pricing.

SPECIFICATIONS

SENSORS: P=1/8″ Phone Plug and W=Tinned Wires

Specifications*

MODEL	ROSM-P and ROSM-W
Speed Range	1-20,000 RPM
Illumination	Visible red LED
On-Target Indicator	Green LED on the wire end cap
Operating Range	1 in. [2.5 cm] up to 24 in. [0.6 m] and 45° offset from the target
Operating Temperature	14° to 158°F [-10° to 70°C]
Power Required	5.0 to 24VDC, 50 mA
Output Signal	Positive pulse input voltage 0 to +5 V
Humidity	Maximum relative humidity 80% for temperature up to 88°F [31°C] decreasing, linearly to 50% relative humidity at 104°F [40°C]
Cable Length	ROSM-P: 8 ft. [2.4 m] ROSM-W: 22 ft. [6.7 m]
Material	303 stainless steel; ROSM-P supplied with two M16 jam nuts and mounting bracket
Lens	Acrylic plastic
Dimensions	Threaded tube 2.90 in. x 0.62 in. dia. [M16 x 1.5 x 74 mm]