ROLS – Remote Optical Laser Sensor

หมวดหมู่: Stroboscope

รายละเอียดเพิ่มเติม
บทวิจารณ์ (0)

DESCRIPTION

1-250,000 RPM. Extremely versatile and able to work over long distances (up to 25 feet). The ROLS-W (tinned wire termination) and ROLS-P (1/8″ phone plug termination) are threaded stainless steel remote optical sensors with a visible red laser light source. All these sensors have the on-target green LED indicator.

Model ROLS-P: Remote Optical Laser Sensor with 8 ft. cable, 1/8″ (3.5 mm) phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape

Model ROLS-P-25: Remote Optical Laser Sensor with 25 ft. cable, 1/8″ (3.5 mm) phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape

Model ROLS-W: Remote Optical Laser Sensor with 8 ft. cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape

Model ROLS24-W: Remote Optical Laser Sensor with 24VDC input power, 8-foot cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape

Model ROLS24-W-25: Remote Optical Laser Sensor with 24VDC input power, 25-foot cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape

Longer Cable Models and Bulk Sensor Cable are available for any of our sensors. Please give us a call or email us for pricing.

FEATURES

COMPATIBILITY

TACHOMETERS	Batteries/Power Supplies		SENSORS W=Tinned Wires; P = 1/8″ Phone Plug
			ROLS-W	ROLS-P
PLT-200	2/AA	2/AA		X
ACT-1B	12VDC or AC Powered		X
ACT-3X			X
F2A1X			X
F2A3X			X

STROBOSCOPES	Sensors – P = 1/8″ Phone Plug	Lamps
	ROLS-P		L1903	L1905
Nova-Strobe dbx	X		X
Nova-Strobe dax	X		X
Palm Strobe x	X			X
Phaser-Strobe pbx	X		X

SPECIFICATIONS

W= tinned wire leads, P= 1/8″ [3.5 mm] stereo phone plug termination).

MODEL	ROLS-P ROLS-W
Specifications*	CE marked
Speed Range	1-250,000 RPM
Illumination	Visible Red Laser, Class 2 (per IEC 60825-1:2014).
Classification	This product complies with IEC60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 of June 2007
Max Laser Output	1mW max
Pulse Duration	Continuous
Laser Wavelength	650 nm (visible red)
Beam Divergence	< 18 mrad
Beam Diameter	4 x 7 mm typical at 2 m
Laser Diode Life	8,000 operating hours MTBF (1-year warranty)
On-Target Indicator	Green LED on the wire end cap
Operating Range	Up to 25 feet [7.6 meters] and 60 degrees offset from the target
Power Requirement�	ROLS: 3.3 – 15VDC, 0.4W max ROLS24-W: 24VDC ±10%, 0.4W max NOTE: 24VDC power input option available see ordering information.
Output�	ROLS: Open collector with an internal pull-up resistor to supply voltage; positive pulse when target present; Output Voltage = Supply Voltage ROLS24-W: Open collector with an internal pull-up resistor (5600 ohms) to supply voltage minus ~5V; positive pulse when target is present Optional Outputs Available – Open Collector or TTL pulse (3.3VDC), Negative pulse (Contact factory)
Operating Temp	14°F to 158°F [-10°C to 70°C]
Humidity	Maximum relative humidity 80% for temperature up to 88°F [31°C] decreasing linearly to 50% relative humidity 104°F [40°C]
Connection	3.5 mm [1/8 inch] male stereo plug (ROLS-P); Tinned wires (ROLS-W)
Material	303 stainless steel supplied with two M18 jam nuts and mounting bracket
Lens	Acrylic plastic
Dimensions	Threaded tube 3.12 in. x 0.71 in. diameter [18 x 1.5 x 79.4 mm] long