RLS – Rugged Laser Sensor

หมวดหมู่: Stroboscope

รายละเอียดเพิ่มเติม
บทวิจารณ์ (0)

DESCRIPTION

We’ve taken our hugely popular Remote Optical Laser Sensor (ROLS) and packaged it in a Rugged 316L SS IP67 rated enclosure. Although optical speed sensors require atmospheres that are clean and free of mist, steam, dirt, oil, and other contaminants in order to function properly there are times when contamination can occur accidentally. Our Rugged Laser Sensor (RLS) will survive these unintended episodes. Simply clean off the laser and detector windows and your up and running again. The RLS utilizes a watertight M12 connector that facilitates easy removal for cleaning. With an operating range of up to 25 feet, the RLS can be used in applications where close proximity isn’t convenient or safe. The laser light source makes setup incredibly easy. Simply aim the laser at a reflective tape or high contrast target and you’re ready to start measuring. The sensor has an on-target Indicator built-in to confirm that the sensor is detecting the target. The RLS is supplied with a 3-meter cable with a choice of tinned flying leads or a 1/8″ phone plug connector for use with all of our portable tachometers and stroboscopes. You can also extend the cable length by adding our 25-foot extension cable(s).

Note: The RLS24 is not compatible with Monarch portable tachometers, stroboscopes, or the self-powered sensor. Please see RLS-P

Available in 4 variations:

Model RLS-W: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape (4-15VDC input power)

Model RLS24-W: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape (10-24VDC input power)

Model RLS-P: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to 1/8″ phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape (4-15VDC input power)

Model RLS24-P: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to 1/8″ phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape (10-24VDC input power)

FEATURES

Rugged IP67 package
316L stainless steel housing
Up to 25 ft. working distance
Standard TTL pulse output (other outputs available)
On Target Indicator
Measure up to 250,000 RPM
Includes mounting bracket and hardware
Includes 12″ of reflective tape
Includes cable with integrated watertight M12 connector.
Choose flying lead or 1/8″ phone plug connection
Compatible with all Monarch tachometers and stroboscopes

�COMPATIBILITY

TACHOMETERS	Batteries/Power Supplies		SENSORS W=Tinned Wires; P = 1/8″ Phone Plug
			RLS-W	RLS-P
PLT-200	2/AA	2/AA		X
ACT-1B	12VDC or AC Powered		X
ACT-3X			X
F2A1X			X
F2A3X			X

STROBOSCOPES	Sensors – P = 1/8″ Phone Plug	Lamps
	RLS-P		L1903	L1905
Nova-Strobe dbx	X		X
Nova-Strobe dax	X		X
Palm Strobe x	X			X
Phaser-Strobe pbx	X		X

SPECIFICATIONS*

Speed Range	1-250,000 RPM
Illumination	Visible Red Laser Laser Specs:�Classification: Class 2 (Per IEC 60825-1:2014) This product complies with IEC 60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No 50 of June 2007 Maximum Laser Output:�1mW Pulse Duration:�Continuous Laser Wavelength:�650 nm (Visible Red) Beam Divergence:�<18 mrad Beam Diameter:�4×7 mm typical at 2 meters Laser Diode Life:�8,000 operating hours MTBF (1-year warranty)
On Target Indicator	Green LED (side-mounted)
Operating Range	Up to 25 feet [7.6 m] and 60 degrees offset from the target
Power Required	RLS-W and RLS-P: 4-15VDC +20% 0.5W RLS24-W and RLS24-P: 10-24VDC ±20% 0.5W
Output	Standard:�Open collector with an internal pull-up resistor (5600 ohms) to supply voltage; positive pulse when target is present Note: on 24V unit, output voltage = input voltage – 5V Optional:�Negative pulse, true open collector, 3.3V output (TTL) – contact factory
Enclosure	Material: 316L Stainless Steel Dimensions: 0.787″ [20.0 mm] dia. X 4.00″ [101.7 mm] length Rating: IP67
Connection	Watertight M12 connector (at the sensor) with 3-meter cable. Cable termination end can be ordered with 1/8″ phone plug connector (-P) or with tinned leads (-w)