Electrical Tester PCE-LCT 1-ICA incl. ISO Calibration Certificate

With the PCE-LCT 1-ICA electrical tester, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The PCE-LCT 1-ICA electrical tester captures these currents and displays them on the display. For example, the PCE-LCT 1-ICA can be used to detect insulation faults. This is particularly advantageous where machines are operated that can not or must not be switched off and in which an examination of the insulation is pending. The fact that not only leakage currents can be measured with the leakage current clamp, but also the normal current flow, voltage up to 400V, resistance and passage, the leakage current clamp is ideal for the electrician, who has to perform other measuring tasks in addition to the device tests. Thanks to its compact design, the PCE-LCT 1-ICA leakage current clamp fits into any pocket. The robust rubber protection protects the measuring device against small drops from low heights and makes the leakage current clamp a reliable companion especially in the field of electrical inspection and workshop technology.

– Leakage current measurement via current clamp
– Current measurement up to 100 A
– Voltage measurement up to 400 V
– Continuity test
– Resistance measurement up to 400 Ω
– Digital 40-digit bargraph
– High resolution
– Maximum / minimum value retention in display
– Robust rubber protection
– Test leads included in delivery
– Incl. ISO Calibration Certificate

Leakage current and current (AC A)
Measurement ranges	Resolution	Accuracy
50 / 60 Hz	400 Hz … 1 kHz
40-mA	10 µA	± (1% + 0.5-mA)	± (4.5% + 0.5-mA)
400-mA	100 µA	± (3% + 5-mA)	± (3% + 5-mA)
4 A	1-mA	± (4% + 0.1-mA)	± (4% + 0.1 A)
40 A	10-mA	± (4% + 1 A)	± (4% + 1 A)
80 A	10-mA	± (2.5% + 1 A)	± (3% + 1 A)
80 A – 100 A	100-mA	± (5% + 1 A)	± (5% + 1 A)
Voltage (AC V)
Measurement ranges	Resolution	Accuracy
50 / 60 Hz	400 Hz … 1 kHz
400V	1V	± (1.5 % + 2 digits)	± (2 % + 4 digits)
Resistance
Measurement ranges	Resolution
Accuracy	Alarm
400 Ω	0.1 Ω	± (1% + 2 digits)	Measurement value <38Ω
General Technical Specifications
Display		3 3/4
Measured electrical properties		AC V, AC A, resistance
Security standards		CAT III 300V / CAT II 600V
Diameter of the clip		30 mm
Input impedance		10 MΩ
Registration rate		2 Hz (numerical values), 20 Hz (bar graph)
Operating temperature		-10 … 50ºC / 14 … 122ºF
Operating humidity		<85% H.r.
Storing temperature		-20 … 60ºC / -4 … 140ºF
Auto shut-off		After 30 minutes
Power		9 V battery
Input current		10-mA
Weight		200 g / < 1 lb
Dimensions		210 x 62 x 35.6 mm / 8.2 x 2.4 x 1.4 in