The PCE-FM 200 force gauge offers the option of mounting the force gauge on a test stand by means of threads on the rear of the device. Test stands are always used in a force gauge if reproducible measurement results are required during the force measurement. These test stands are ideal additions to a force gauge, because they are operated by a precise handwheel or a motor. In addition, both tensile and compressive force measurements can be performed on them. Experiments in the laboratory are thus possible with the force gauge as well as the inspection of incoming goods.
This Dynamometer comes with an ISO calibration certificate (PCE-FM 200-ICA).
– ISO calibration certificate
Measuring range | 2 … 200 N / 0.2 … 20 kg / 0.4 … 45 lbs |
Resolution | 0.1 N / 0.02 lbs |
Pressure calibration | 1 Mpa |
Load cell | Integrated load cell with M6 connection |
Measuring range | 1 … 100% of the full scale |
Measurement accuracy | ±0.5% |
Units | n, kg, lb |
Display | LCD |
Operating temperature | 10 … 30°C / 50 … 86°F |
Relative humidity | 15 … 80% |
Working conditions | The device must not be located near sources of vibration or corrosive substances |
Weight | 1 kg / 2.2 lb |