Track-It™ Extreme Temperature Loggers

รายละเอียดเพิ่มเติม
บทวิจารณ์ (0)

The Track-It Extreme Temperature Data Loggers are battery-powered, stand-alone data loggers that record up to 30,000 temperature data samples. The units are easily configured using the included Track-It Software. Plug the logger into the Extreme Logger Reader (required additional item), which connects via a standard USB cable to any open USB port on your PC, and the Track-It™ Software automatically identifies the logger. The logger communicates via the Extreme Logger Reader without opening the logger, so the housing’s long-term integrity is ensured. The Track-It Extreme Temperature Logger housing is made of 316L Stainless Steel and meets IP68 rating standards. Set the unit up to start or stop recording immediately, at a predetermined time and date, or only at specific temperature values. The sample storage rate can be set from 1 sample every 2 seconds up to 1 sample every 24 hours. The onboard data storage is non-volatile, so data will not be lost in the event of a depleted battery.

Typical Uses

Validation
Medical Device Sterilization
Steam Heat Sterilization
Autoclave Sterilization
Ovens/Chambers
Refrigerators/Freezers
HACCP Implementation
Pasteurization
Food and Beverage Processing
Uniformity Mapping
Pharmaceutical Processing
Storage

FEATURES

Up to 30,000 samples per record
Alarm set-points allow graphical visualization of excursions
Compact size allows for easy placement in any application
21 CFR Part 11 compliant software
9-point NIST certificate included
Temperature range: -58 to 302°F (-50 to 150°C)
Extended range for probe tip: -70 to 300°C
0.1°C accuracy and excellent repeatability
Accurate internal clock (1 minute/year)
MKT calculation over an entire data file or selected time intervals
Flexible and fixed probes
Simple setup and deployment
RTD technology provides superior accuracy over a wide temperature range

SPECIFICATIONS*

GENERAL

Sample Rate	User-configured 1 every 2 seconds to 1 every 24 hours Number of samples: 30,000 stored in non-volatile memory
Record Trigger	Two independent triggers Multiple trigger modes: Instantaneous, On Alarm, Time and Date (start and stop)
Record Mode	Fill to end of memory or cyclic, number of samples, and time duration
Alarms	Two (2) 2 user-programmable alarms (High or Low)
Real-Time Clock	Accuracy ± 1 minute/year at 77°F [25°C]
Communication	Reader with USB connection; no need to open Logger to read data or program
Compliance	CE compliant; Low Voltage Directive (LVD) 2014/35/EU Electromagnetic Compatibility Directive (EMC) 2014/30/EU Restriction of Hazardous Substances (RoHS 3) Directive 2015/863/EU
Software	Track-It Software — program device, view data (historic or real-time), plot data, export to Excel™ FDA Regulation 21CFR Part 11 compliant
Battery	3B5700 ½ AA lithium sulfuryl chloride 3.9V 800 mAh rated 150°C; field-replaceable (Monarch PN: 5396-9934) Life: up to 2 years typical @ 1-minute sample rate [@20°C]
Dimensions	1.43″ [36 mm] diameter x 2.3″ [55 mm] excluding probes Probe lengths: 1″ [25 mm], 2″ [50 mm], 4″ [10 cm], 22″ Flexible [56 cm] Threaded Probes: M5 x 0.8 (See dimensional drawings below for full details.)
Weight	7.3 ounces
Material	316L stainless steel

MEASUREMENT

Temperature Range (fixed probe)	-58° to 302°F [-50° to +150°C]
Accuracy	±0.2°F from -22° to 302°F [±0.1°C from -30° to +150°C]
	±0.4°F from -58° to -22°F [±0.2°C from -50° to -30°C]
Temperature Range (flexible probe)	-94° to 572°F [-70° to +300°C] probe only
Accuracy	±0.2°F from -22° to 302°F [±0.1°C from -30° to +150°C]
	±0.5°F from -22° to 572°F [±25°C from -70° to +300°C]