Track-It™ DC Voltage & Current Data Logger with Standard Battery

หมวดหมู่: DC Voltage & Current Data Logger

รายละเอียดเพิ่มเติม
บทวิจารณ์ (0)

DESCRIPTION

The Track-It DC Voltage and Current Data Loggers are two-channel battery-powered stand-alone compact data loggers that record up to 32,000 samples each of DC Voltage or Current data. Units are available in 4 DC voltage ranges or for DC current. The unit is easily configured using the included Track-It™ Software. Simply plug the logger into an open USB port on your PC and the software automatically identifies the logger. Configure the unit to start and stop recording at a predetermined time and date or only when an alarm condition is sensed. The sample storage rate can be set from 1 sample every 2 seconds to 1 sample every 24 hours.

The onboard data storage is non-volatile so data will not be lost in the event of a depleted battery. The Track-It DC Voltage and Current Loggers can also be used to record ambient temperature if one or neither input is being used. The information displayed on the LCD is also user programmable and can be sequenced by pressing the logger button. A multicolored LED indicator notifies the user of alarms or general activity.

Typical Uses

Industrial process monitoring
Troubleshooting problematic signals
Productivity monitoring
Remote indication

FEATURES

Push button to start recording immediately or program to start recording at a later time and date
Up to 64,000 samples per recording session
500mVDC, 1VDC, 5VDC, 10VDC or 20mA
+/- 0.5% accuracy
Multiple alarm set points
Compact size
NIST Traceable Calibration Certificate available
Integral USB interface/connector (no cable required)
Powerful interactive Track-It Software package included
1 year or 5-year lithium battery options
High accuracy and repeatability
Accurate internal clock (1 minute/year)

SPECIFICATIONS*

General

Record	Sample Rates:�User configured 1 every 2 seconds to 1 every 24 hours No. of Samples:�32,000 or 64,000 (depends on config)
Record Trigger	Two independent triggers Multiple trigger modes: Instantaneous, button control, on alarm, time and date (start and stop), day of week
Record Mode	Fill to end of memory, cyclic, number of samples, time duration
Display	4-digit LCD (non-display versions available with LED only) User programmable: Indication of data value, eng units, alarms, record mode, battery condition, time/date, memory
LED	User programmable: Indication of alarms, recording, triggered
Button	User programmable: View display, record on/off, reset alarms
Alarms	2 user-programmable alarms (High or Low)
Communication	Direct USB connection
Software	Track-It™ Software—Program device, view data (historic or real-time), export to Excel™ (simple and advanced modes)
Battery	Coin Cell Battery: Lithium CR2032 Life: 1 year @ 1 minute sample rate
Dimensions (LxHxW)	4.06” (10.32cm) x 0.66” (1.67cm) x 1.00” (2.54cm)

MEASUREMENT

Temperature Range	-20 to +85°C /-4 to 185°F w/EF65162 battery -20 to +70°C /-4 to 158°F w/CR2032 battery
Accuracy	±0.5°C 0 to 50°C / 32 to 122°F ±2°C –20 to 85°C / -4 to 185°F
Resolution	0.06°C / 0.11°F
Clock Accuracy	± 1 minute/year
	Available Analog Modules (for DC V/I)�
Range	0 to 500mV (no preconditioning)
Accuracy	±0.5% of full scale
Resolution	±0.1mV
Input Modules	500mV, 1V, 5V, 10V, 20mA