ACT-1B Panel Tachometer

หมวดหมู่: Tachometer

รายละเอียดเพิ่มเติม
บทวิจารณ์ (0)

DESCRIPTION

The ACT-1B Panel Tachometer is compatible with all Monarch speed sensors with tinned wire “-W” connections. It can be factory configured to meet your specifications or user-configured on-site with the optional USB Programming Cable. The USB Programming Cable and free downloadable PM Remote Software also allow real-time display and recording of data on a local PC.

FEATURES

All models – Universal input, non-contact operation from optical, infrared, laser, proximity, and magnetic sensors or direct TTL and 3.3 to 50 Vac signals

ACT-1B Panel Tachometer

Economically priced
1/8 DIN sized
5-digit LED display
5 to 99,999 RPM range
Universal sensor inputs
Compatible with most speed sensors
User-configurable*
View real-time data on PC*
Store data in Excel File in real-time*
Universal A/C power 100 to 240 Vac, 50/60Hz or optional DC input power
Optional 4-20mA or 0-5VDC scalable output

*Requires optional USB programming cable and free downloadable PM Remote Software.

SPECIFICATIONS*

Speed Range	5 to 99,999 RPM
Accuracy	+/-1 RPM or 0.005% of reading
Resolution	1 RPM
Display	5-digit, 0.56″ (14 mm) high red LED
Display Update	Twice per second above 120 RPM Programmable withPM Remote Software and USB programming cable
Dimensions	1/8 DIN by 4.5″ [114 mm] deep Panel cutout: 3.58″ x 1.74″ [91 x 44 mm]
Power Supply	Standard: 100 – 240 Vac +/-10%, 50/60 Hz, Optional: 12 or 24VDC +/-10%, isolated, 5.0 watts
Inputs	Universal input for optical, proximity, two-wire, or three-wire magnetic, infrared, or laser sensors TTL input or 3.3 Vac to 50 Vac input Standard input is 1 pulse per revolution
Sensor Excitation	12VDC at 5mA for proximity sensors 12 VDC at 75mA for all other sensors (optional 5 or 24 Vdc available)
Recommended Sensors	Optical – ROS-W, ROS-HT-W-25 Proximity – P5-11 Magnetic – M-190W or MT-190W Infrared – IRS-W Laser – ROLS-W, RLS-W, SLS-115/230, CSLS
Pulse Repeater Output: (Optional)	0 to 5 V TTL pulse, non-inverting, one pulse out for each pulse in. Positive or negative out. Programmable using PM Remote Software and USB programming cable
IO (option)	CURRENT (IO): 4 to 20 mAout, 16-bit resolution 12VDC compliance voltage Full-scale RPM settings as specified when ordered or programmable using PM Remote Software and optional USB programming cable
Analog Output (option)	0 to 5VDC, 5 mA 16-bit resolution Full-scale RPM settings as specified when ordered or programmable using PM Remote Software and optional USB programming cable
PO (option)	0 to 5 V TTL pulse, non-inverting, one pulse out for each pulse in mA Positive or negative out Programmable using PM Remote Software and optional USB programming cable
Environmental	Indoor use only Installation category II per IEC 664 Temperature: -10 degrees C to 50 degrees C operating per IEC 61010-1 Humidity: maximum relative humidity 80% for temperatures up to 31 degrees C, decreasing linearly to 50% relative humidity at 40 degrees degreeC
Electrical Safety:	Meets EN61010-1:2001, EC low voltage directive 72/23/EEC and 89/336/EEC