HI9810-6 Portable pH/EC/TDS Meter

The HI9810-6 is an economical, wateproof, portable meter that measures pH, conductivity (EC), and total dissolved solids (TDS) with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be be displayed on the LCD and knobs for single point calibration of pH and EC/TDS. The HI9810-6 is most suitable for agricultural, greenhouse and hydroponic applications.

• 3 in 1 probe with pH, EC/TDS and temperature sensors
• Amplified pH electrode for immunity to electrical noise including from ballasts and pumps
• Large LCD with instructions

• More Information

  pH Range	0 to 14 pH
  pH Resolution	0.1 pH
  pH Accuracy	±0.1 pH
  pH Calibration	Manual 1 point through offset trimmer
  EC Range	0 to 6000 µS/cm
  EC Resolution	10 µS/cm
  EC Accuracy	±2% F.S.
  EC Calibration	manual, one-point
  TDS Range	0 to 3000 mg/L
  TDS Resolution	10 mg/L
  TDS Accuracy	±2% F.S.
  EC/TDS Temperature Compensation	automatic, 0 to 50°C (32 to 122°F) Compensation with a ß of 2%/°C
  Temperature Correction Coefficient	β = 2% /°C
  EC to TDS Conversion Factor	1 µS/cm = 0.5 mg/L
  EC/TDS Probe	HI1285 combination, amplified, double-junction, gel pH electrode with incorporated EC/TDS probe and built-in temperature sensor and 1m (3.3′) cable
  Battery Type/Life	9V / approximately 150 hours of continuous use
  Environment	0 to 50°C (32 to 122°F); max 95% RH non-condensing
  Dimensions	185 x 82 x 45 mm (7.3 x 3.2 x 1.8″)
  Weight	520 g (1.1 lb.)
  Ordering Information	HI9810-6 is supplied with HI1285 multiparameter probe, HI70007 pH 7.01 buffer solution sachet (1), HI70031 1413 µS/cm calibration solution sachet (1), HI70032 1382 ppm sachet (1), 9V battery, and instructions.